48V 160Ah Sodium-Ion Rack Battery 7.68kWh with 160A Max Discharge and 10,000 Cycles for Telecom Backup
| Nominal Voltage: | 48.0V | Nominal Capacity: | 160Ah |
| Total Energy: | 7,680Wh | Voltage Range: | 24.0-55.2V |
| Max Discharge Current: | 160A | Standard Charge Current: | 80A |
| Cycle Life: | ≥10,000 Cycles | Operating Temperature: | Charge -5°C To 70°C; Discharge -20°C To 70°C |
| Dimensions: | 732.3 X 482 X 230.6 Mm | Weight: | Approx. 95kg |
| High Light: | 48V 160Ah Sodium Ion Battery,160A High Rate SIB Pack,7.68kWh NFPP Rack Battery |
||
48V 160Ah 7.68kWh NFPP Sodium-Ion Rack Battery | 160A Max Discharge | 10,000 Cycles
Exliporc model FP-N-48160 — a 48V 160Ah sodium-ion rack battery built for telecom sites and solar backup, with 160A continuous discharge, 10,000 cycle life and stable operation from -20°C to 70°C.
- 160A continuous discharge (1C) — covers high-startup loads such as telecom rectifiers and pumps without derating.
- 10,000 cycles at 25°C — sodium-ion chemistry delivers long service life with 80% capacity retention.
- -20°C to 70°C discharge window — no heating blanket needed in cold sites, no derating in hot cabinets.
- Inherently safer chemistry — sodium-ion cells avoid the thermal runaway risk profile of lithium packs.
- Rack form factor 732 x 482 x 230mm — fits standard 19-inch cabinets with front handles and terminals.
The FP-N-48160 uses NFPP sodium-ion cells configured 1P16S, giving a nominal 48V 160Ah pack with 7.68kWh of usable energy. Sodium-ion chemistry is intrinsically safer and remains functional across a far wider temperature window than LFP, which makes it a practical choice for outdoor telecom cabinets and unheated solar plant rooms.
The integrated BMS handles cell balancing, over-charge and over-discharge protection, over-current, short circuit and high/low temperature protection, and communicates over CAN 500K, dual RS485 and RS232. Front LEDs show state of charge and alarms, and DIP switches allow addresses 2-15 for parallel banks.
The pack measures 732.3 x 482 x 230.6mm at approximately 95kg, with front handles for two-person rack installation. Standard charge and discharge current is 80A, with quick charge and maximum continuous discharge both at 160A.
- Telecom 4G/5G base station backup
- Residential and commercial solar storage
- Industrial UPS and emergency power
- Off-grid microgrids and remote sites
- Cold-climate and high-temperature installations
| Parameter | Value |
|---|---|
| Model | FP-N-48160 |
| Battery Chemistry | Sodium-ion (Na+), NFPP polyanion cathode |
| Rated Voltage | 48.0V |
| Rated Capacity | 160Ah |
| Total Energy | 7,680Wh (7.68kWh) |
| Configuration | 1P16S |
| Voltage Range | 24.0V – 55.2V |
| Cell Specification | 3.0V / 160Ah, 4.6kg, 71 x 173 x 204 mm |
| Standard Charge Current | 80A |
| Quick Charge Current | 160A |
| Standard Discharge Current | 80A |
| Max Continuous Discharge | 160A |
| Operating Temperature | Charge -5°C to 70°C; Discharge -20°C to 70°C |
| Cycle Life | ≥10,000 cycles at 25°C (0.5C, to 80% capacity) |
| Communication | CAN 500K, dual RS485, RS232, DIP address 2–15 |
| Dimensions (L*W*H) | 732.3 x 482 x 230.6 mm |
| Weight | Approx. 95kg |
| Humidity | 20–85% RH |
| Certification | CE, IEC 62619, UN38.3, MSDS |
Each pack is packed in an export carton with shock-proof foam and UN38.3 compliant labelling; wooden cases are used for sea freight. Production lead time is 15-20 working days after deposit.
Specifying sodium-ion storage for a telecom or solar project? Contact our engineering team for datasheets, cycle test reports and container pricing.
48V 160Ah Sodium-Ion Rack Battery 7.68kWh with 160A Max Discharge and 10,000 Cycles for Telecom Backup
48V 160Ah NFPP sodium-ion rack battery delivers 7.68kWh and 160A continuous discharge for telecom backup. Features 10,000 cycles, -20°C to 70°C operation, and CE/IEC/UN38.3 certifications. Safer chemistry, 19-inch rack design, and CAN/RS485 communication enable reliable, scalable deployment.
LiFePO4 Battery Pack with 48V/51.2V System Voltage and 5-10kW Output Power for Hybrid Grid Connection Solar Energy Storage
48V LiFePO4 solar battery (10-50kWh) with hybrid grid connection, 5-10kW output, built-in BMS, LCD screen, and 5-year warranty. Wall/floor mount options for reliable home energy storage.
EU 8000 Cycle LiFePO4 Battery 51.2V Wall-Mounted Home Power Lithium Iron Phosphate Battery with JK BMS
EU-certified 15-16kWh LiFePO4 battery with 10,000-cycle lifespan, IP65 rating, and wall/floor mounting. Built-in BMS, parallel expansion up to 15 units, and compatibility with hybrid solar systems.
EXLIPORC 30kWh High Power Solar Battery 600Ah LiFePO4 Lithium Battery Pack with 8000 Cycle Life and 5-Year Warranty
30kWh LiFePO4 solar battery with 8000-cycle lifespan, 5-year warranty, and multiple communication ports. Ideal for off-grid/hybrid systems with OEM/ODM customization options.
