Shenzhen, China – June 2026 – EXLIPORC New Energy (Shenzhen) Co., Ltd. has announced the commercial release of its latest residential energy storage system, the ESS-51.2/314-DC-B — a 16kWh LiFePO₄ battery pack that combines an IP65 protection rating, 11,000-cycle design life, and a space-saving form factor purpose-built for modern home installations.
Why IP65 matters for residential energy storage
Most residential battery systems on the market today carry an IP54 or IP55 rating — adequate for indoor or sheltered installations, but a potential liability in garages, semi-outdoor areas, or humid climates.
IP65 changes that equation. The “6” denotes complete protection against dust ingress; the “5” means the enclosure can withstand low-pressure water jets from any direction. For homeowners, that translates into:
- Garage floor placement without担心 humidity or concrete dust shortening battery life.
- Semi-outdoor installations (covered patio, carport, utility closet) become viable.
- Coastal and high-humidity regions — the battery’s internal electronics are sealed against salt-laden air and condensation.
“IP65 in a residential battery is still relatively rare,” noted a product engineer at EXLIPORC. “We designed this unit specifically for real-world home environments, not just climate-controlled utility rooms.”
11,000 cycles: The new durability benchmark
The ESS-51.2/314-DC-B is built around LFP71173207/325Ah prismatic LiFePO₄ cells configured in a 1P16S topology (16 cells in series, 1 in parallel), delivering a nominal 51.2V system voltage — the de facto standard for residential 48V-class battery systems worldwide.
The rated cycle life is ≥11,000 cycles at 25°C ±2°C, 0.5C charge/discharge rate, retaining ≥70% State of Health (SOH).
To put that number in perspective:
| Cycle life | Daily use | Calendar life (approx.) |
|---|---|---|
| 6,000 cycles | 1 cycle/day | ~16 years |
| 11,000 cycles | 1 cycle/day | ~30 years |
For a homeowner, 11,000 cycles effectively means the battery is no longer the limiting factor in the system’s service life — the inverter or balance-of-system components will likely need replacement first.
Compact footprint, high energy density
Despite packing 16kWh of usable energy, the unit measures just 540mm × 242mm × 791mm (W × D × H) and weighs 130kg ±5kg. The inclusion of landing pulleys (built-in wheels) is a deliberate design choice — a 130kg battery is difficult to maneuver into a home utility room, but the pulley system allows two people to position it without specialist equipment.
The form factor is optimized for corner placement or wall-side installation in garages and utility closets where floor space is at a premium.
Built-in BMS and parallel expansion
The integrated intelligent BMS (Battery Management System) continuously monitors cell voltage, pack current, and temperature. It also performs active cell balancing during charge/discharge cycles — a critical function for extending cycle life and maintaining capacity over time.
Multiple ESS-51.2/314-DC-B units can be connected in parallel to scale up both capacity and power output. For a typical household with 10–20kWh daily consumption, two or three parallel units provide full-day backup coverage with peak shaving capability.
Electrical specifications at a glance
| Parameter | Specification |
|---|---|
| Model | ESS-51.2/314-DC-B |
| Cell type | LFP71173207 / 325Ah, LiFePO₄ |
| Configuration | 1P16S |
| Nominal voltage | 51.2V DC |
| Rated capacity | 314Ah |
| Rated energy | 16kWh |
| Operating voltage range | 43.2V – 58.4V DC |
| Max charge current | 200A |
| Max discharge current | 200A |
| Recommended charge current | 157A |
| Round-trip efficiency | ≥90% @ 25°C, 1C |
| Cycle life | ≥11,000 cycles @ 25°C, 0.5C, 70% SOH |
| IP rating | IP65 |
| Operating temperature | 0°C – 55°C |
| Storage temperature | -20°C – 35°C |
| Communication | RS485 / CAN |
| Dimensions (W×D×H) | 540mm × 242mm × 791mm |
| Weight | 130kg ±5kg |
Safety and compliance
The ESS-51.2/314-DC-B is engineered to meet rigorous electrical safety standards:
- Insulation resistance: ≥2MΩ @ 500V DC, 60s
- Withstand voltage: ≤30mA @ 710V DC, 60s
- Ground resistance: ≤0.2Ω (electrical enclosure to earth)
- ESD protection: ±6kV contact discharge, ±8kV air discharge
- Altitude rating: ≤2,000m (derating required above 2,000m)
About EXLIPORC New Energy (Shenzhen) Co., Ltd.
EXLIPORC is a Shenzhen-based designer and manufacturer of lithium-ion energy storage systems for residential, commercial, and industrial applications. The company’s product portfolio spans from compact residential batteries to utility-scale containerized storage solutions, with a technology focus on LiFePO₄ chemistry and intelligent BMS integration.
Media contact:
EXLIPORC New Energy (Shenzhen) Co., Ltd.
C506, Innovation Plaza, Pingshan Avenue, Pingshan District, Shenzhen, Guangdong, China
Email: gina@exliporcpower.com
Website: www.exliporcpower.com
Product specifications are subject to change without notice. For the latest datasheet and certification status, visit www.exliporcpower.com.
